Partially at best. A passive stack moves soil gas only by thermal buoyancy, which helps but often is not enough over Front Range soil. Test the house; if it reads 4 pCi/L or higher, adding an inline fan converts it to an active system for $650 to $1,100.
More detail
Builders in jurisdictions with radon-resistant construction codes rough in the pipe because it is cheap during framing: a tee under the slab gravel, a sealed membrane, a vertical run through the roof, often a junction box in the attic awaiting a fan. What nobody does at closing is test, and buyers reasonably assume the pipe means the problem is handled. Two checks tell you what you have: follow the pipe in the attic and confirm it actually exits the roof rather than dead-ending, and look for a fan housing and a U-tube gauge, whose absence means passive. Then run a test like any other house. Activation is the best deal in radon work because the expensive parts, the sub-slab reach and the roof penetration, already exist. The passive versus active comparison sets the two side by side, and new-construction testing explains why new homes still read high.