FAQ

We want to finish our basement. What about radon?

Direct answer

Test before you design, mitigate before you drywall. A finished basement moves bedrooms and rec rooms onto the level where radon concentrates, and routing a mitigation pipe is cheap during framing and ugly after the ceilings close.

More detail

The sequence matters more than anything else. A test now tells you whether the project includes a radon line item at all, and at metro odds, roughly a coin flip, it often does. During design, reserve a chase for the pipe run, keep the sump accessible behind a panel rather than buried behind drywall, and decide the suction point location while the floor plan is still on paper. During rough-in, the mitigation install happens alongside the other trades, pipe hidden in walls, penetrations sealed before insulation. After completion, a verification test with the new rooms occupied confirms the lowest bedrooms sit under 2 pCi/L. Retrofitting the same system through finished ceilings costs more and shows more. One more planning note: new basement bedrooms need egress windows by code, and those cuts through the foundation wall are themselves worth sealing attentively. The full walkthrough is in finishing a basement radon-first.

Authoritative sources

Ready to get started?

About half of Colorado homes test over the EPA action level, and every metro county is EPA Zone 1. Mon-Sat 8am-7pm.

Call (983) 900-3118Text us

Prefer to text? Open your texting app